Izdelki za polnilo za črnilo (21)

COMPOSITION ET ASPECT Enduit en poudre à base de plâtre, carbonate de calcium, résine, et divers adjuvants. La pâte obtenue est de couleur blanche. SUPPORTS ADMIS Tous types de supports en intérieur : plâtre, plaques de plâtre à bords arrondis ou amincis, carreaux de plâtre, béton, enduit ciment, agglos, béton cellulaire, briques, terre cuite... REVÊTEMENTS Le recouvrement, après séchage complet de l’enduit, peut se faire par tous types de peintures, enduits à base de plâtre, enduits pâteux, colle papier peint. Les colles carrelage devront être adaptées aux supports plâtre. DOCUMENTS À CONSULTER • DTU 25.41. Norme DIN 1168 • DTU 59.1 : Travaux de peinture • NF EN 13963 CARACTÉRISTIQUES TECHNIQUES • Granulométrie : fine • Adhérence : conforme à NFT 30 608 • pH : neutre • Début de prise : 50 mn • Fin de prise : 1 h 10 • Flexion : 3 N/mm • Compression : 7 N/mm² • Réaction au feu : A2s1d0 Produit certifié conforme à la norme DIN 1168. CONDITIONNEMENTS Sacs de 5 à 25 kg sur...

La formulation d’un produit cosmétique est la clé de sa réussite car elle impacte à la fois son efficacité, sa texture et sa qualité. A partir de votre cahier des charges, nous proposons des prototypes fabriqués à partir d'ingrédients naturels. Chaque essai de formulation est évalué avant de vous être proposé pour avoir vos retours et éléments à optimiser. Lorsque vous validez la formule, nous passons aux tests d’évaluation et de caractérisation du produit avant sa fabrication.

Diamantpulver für Polituren und Abtrag - hochwertige Klassierungen ausgewählter Kornqualitäten für beste Abtragsleistungen bei kratzerfreien Oberflächen - auf Basis langjähriger Erfahrungen ausgewählter Korntypen für die Bearbeitung weicher, harter, sprödharter und kristalliner Materialien

KNETOSIL 40 ist ein additionsvernetzendes 1:1 Knetsilikon mit der Endhärte Shore A 40. Dank seiner hohen Zeichnungsgenauigkeit erlaubt es eine sehr präzise Abformung, es ist äußerst dimensionsstabil.

Alline procap contains a unique high quality keratin. Keratin CynaPlus from Alline procap is the result of a patented production process that guarantees almost complete 95% bioavailability and the presence of 18 amino acids. Alline procap combines a natural keratin CynaPlus with a complex of eleven vitamins that provide 100% of the recommended daily amounts by taking two capsules per day. Allin procap contains three minerals that each play an essential role in the hair cycle. These three minerals provide 100% of the recommended daily amounts by taking 2 capsules per day.

Fluid Col Multi-purpose additive powder, to add to a suitable mixture of binders and aggregates, for the on-site production of mortars, grouts and concretes that are self-levelling, rheoplastic, controlled shrinkage or moderately expansionary, high mechanical strength, chemical and waterproofing. The physical-chemical action of Fluid Col is an interaction of positive contributions and modifications: drastic reduction of the A/C ratio, shrinkage-resistant action, superpozzolanic action and reaction of ultrafine fillers (MICROSIL 90), which transforms unstable, soluble, readily reactive calcium hydroxides into stable, insoluble, chemically and mechanically resistant hydrous calcium silicates. Preparation of mortars, grouts, rheofluid concretes, shrinkage-compensated or moderately expansionary, high mechanical, watertightness and chemical stability performance, for structural slubs, anchoring machines, road joints, etc. Add the product in a concrete mixer, mixer truck or mixer, together with the remaining anhydrous components of the mixture: cement and aggregates, any polypropylene and/or steel fibres, etc. The indicative dosage, depending on the type of conglomerate to be packaged and its purposes, varies between 12% and 15% of the weight of the cement. After a first mixing, add the mix water and mix thoroughly, until you obtain a homogeneous whole and free of lumps. The cement dosage must not be less than 350 kg/m³. Fluid Col is perfectly compatible with the addition of fibre d steel and/or polypropylene fibres READYMESH, for the preparation of conglomerates composite s, fibre reinforced. Add 10 - 15% of Fluid Col to the weight of the cement present in the mixture. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Tube | 5 ml Liquid Culture Medium IVD | Sterile | pH 7.1 ± 0.2 Packaging: 25 - 50 units Storage: 2-12 °C Shelf Life: 5 months Selenite F Broth is a selective enrichment medium used for the isolation of Salmonella (including S. typhosa) and some species of Shigella from feces, urine, or other pathological materials. Media stand out as mixtures used in laboratory settings that support the growth of microorganisms, facilitating the examination process. Media contain the nutrients, energy sources, vitamins, and minerals necessary for the growth and development of bacteria, fungi, and other microorganisms. They can have different formulations specifically designed to promote the growth of various microorganisms, resulting in various ready-to-use media such as blood agar and EMB agar. The preparation and proper use of media are critical for the reliability of laboratory results. Proper sterilization and preparation minimize the risk of contamination of the microorganism being examined while allowing for its isolation. Additionally, conducting the preparation phase correctly enables microorganisms to grow and develop properly. Considering these reasons, regular checks are also essential for the consistency and validity of experimental results. Product Code: AKL-351

Spécifique pour les produits difficiles à démouler, par exemple riches en sucre et en protéine. Excellent pouvoir anti-adhérent. Viscosité :700 à 1100 mPa.s (25°C) Valeur d’iode:± 80 Point de fumée:230 °C POIDS SPECIFIQUE:920 kg/m3 (20°C) Formats disponibles:10L – GRV 1000L

SANDING

Miglioratore per fermalievitazione, adatto a paste lievitate, pani prelievitati o precotti destinati alla surgelazione. Formato:10 kg Dosaggio:1%

Battery Cycle Count A typical cell phone battery goes through approximately 500 cycles before retaining at least 80% of its original capacity. Made from new materials, our batteries have zero cycles, ensuring the maximum number of cycles you can use. Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Months Warranty

PROFHILO® h+L is a stabilized hyaluronic acid (HA) based product intended for skin remodeling and treating skin laxity, not just for filling lines and wrinkles. PROFHILO® h+L is to be used in areas affected by skin laxity such as malar and submalar areas of the face. PROFHILO® h+L nourishes the dermal cells and restores skin's firmness. PROFHILO® h+L also improves tissue quality significantly, even in challenging areas, and can be complementary to other aesthetic treatments and dermal filler procedures. SKU:PFLO-0001 Brand:Profhilo Concentration:HA concentration 64mg/ml Indication:Improves tone Improves elasticity of the skin Treatment of skin laxity The Pack Includes:1 x 2ml Syringe 2 x 29G Needles Results' Duration:Results are instant from the first treatment. In general, results will last from 6 to 9 months Articles:Biostimulators vs. Dermal Fillers: What Medical Achieve Radiant Skin with Skin Booster Treatment Manufacturer:IBSA Derma

ESCRIPTION Enduit pour reboucher rapidement les fissures, trous et saignées de toutes tailles sans retrait et sans fissuration. COMPOSITION ET ASPECT Enduit en poudre à base de plâtre, carbonate de calcium, charge minérale, cellulose et divers adjuvants. La pâte obtenue est de couleur blanche. SUPPORTS ADMIS Tous types de supports en intérieur bruts ou peints : plâtre, plaques de plâtre, carreaux de plâtre, béton, enduit ciment, agglos, béton cellulaire, briques, terre cuite… CARACTÉRISTIQUES TECHNIQUES • pH : neutre • Temps de prise : 30 minutes en fonction des conditions ambiantes et de l’épaisseur appliquée CONDITIONNEMENT Sacs de 5 et 15 kg. APPLICATION L’application se fait au couteau à enduire. Consommation : 1kg /m²/mm d’épaisseur. TEMPS DE SÉCHAGE Il dépend des conditions ambiantes, de la nature du support et de l’épaisseur d’application. En règle générale, pour un cm d’épaisseur, l’enduit est sec en 6 heures.

DÉFINITION TECHNIQUE • Enduit multifonctions pour un usage en intérieur • Rebouche : trous, fissures, saignées • Scelle et fixe • Colle : polystyrène, rosaces, corniches • Lisse COMPOSITION ET ASPECT Enduit en poudre à base de plâtre, carbonate de calcium, résine, fibre de cellulose et divers adjuvants. La pâte obtenue est de couleur blanche. SUPPORTS ADMIS Tous types de supports en intérieur : plâtre, plaques de plâtre, carreaux de plâtre, béton, enduit ciment, agglos, béton cellulaire, briques, terre cuite... DOCUMENTS À CONSULTER Enduit conforme à la norme NFT 30 608. DTU 59.1 : Travaux de peinture. STOCKAGE 9 mois en emballage d’origine non entamé à l’abri de l’humidité. REVÊTEMENTS Le recouvrement, après séchage complet de l’enduit, peut se faire par tous types de peintures, enduits à base de plâtre, enduits pâteux, colle papier peint. Les colles carrelage devront être adaptées aux supports plâtre.

Grout CR Composite , castable, anti-washout, controlled shrinkage cement mortar, superfluid consistency, based on high-resistance cements, superpozzolanic fillers (MICROSIL 90), polymeric modifiers, shrinkage resistant agents, specific additives, calcium silicate mineral fibres, selected silica aggregates. - Based on of thickened silica fume - three-dimensionally reinforced fibre with mineral and synthetic fibres - Provides high adherence and adhesion - dimensionally stable (shrinkage-compensated) - Provides high stability-physical chemical and resistance to chlorides and sulphates - suitable for underwater castings: it is anti-washout - high strength in terms of hydrostatic positive and negative thrust. Repair and protective coatings of hydraulic structures, marine and underwater structures, and articles in critical situations: harsh chemical-physical, leaching water, marine atmosphere, etc. Filling of formwork for the containment of cast immersed in sea water. In case of underwater application, the installation operations must be carried out within 8-10 hours of cleaning and "fouling" (accumulation and deposits of organic and inorganic particles on product surfaces) removal. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour 2/3 of total mixture water in the cement mixer, gradually add the product and the remaining water, until a homogeneous mixture of the required consistency is obtained. For sizable filling thicknesses, greater than 60 mm, Ghiaietto 6.10 (inert washed is selected with a particle size of from 6-10 mm) can be added in a percentage ranging from 20% to 40 %, on the basis of practical requirements. In some particularly demanding cases in terms of the resistance to the "dry-wet" cycle (for example, for the action of the tides) or for chemical attacks particularly strong, it would be advisable to add, in addition to the gravel, even thickened silica fume(MICROSIL 90), and in a variable amount depending on the thickness and construction-related need, to further improve the waterproofing and the mechanical strength of the product. In these cases, please contact our Technical Service. In the case of casts in water, make sure of perfect product hardening before removal of the formwork. Approximately 20,50 kg/m² of Grout CR for every centimetre of thickness to be implemented (approximately 2050 kg per cubic metre). Packaging: 25 kg bag UM: €/kg

Grout 2 HP Grout 2 HP is a pourable, fiber-reinforced mortar, used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. The formulation contains very fine high-strength cements, micro-silicas with pozzolanic activity, aggregates in a rational granulometric curve (0.1 ÷ 1.8 mm), and special antisegregative additives. The product is mixed with 11% - 12% of water, requiring vigorous and prolonged mechanical mixing. The special formulation of Grout 2 HP provides the castings with mechanical strength, fracture energy, exceptional durability, and very high chemical-physical resistance. Grout 2 HP has a workability time of about 60-90 minutes, after which the setting process is triggered, followed by progressive hardening. The plastic and hygrometric shrinkage is extremely low thanks to the presence of Readymesh PM-060 multifilament synthetic fibers, which provide volumetric stability. The performances that make Grout 2 HP unique are: • very high compressive mechanical strengths (> 90 MPa at 28 days), • very high mechanical resistance to bending-traction (> 12 MPa after 28 days), • excellent durability and resistance to chemical attacks. Grout 2 HP is used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. It is particularly suitable for operations where high mechanical performance is required after short curing (compressive strength at 3 days > 60 MPa) and in operations carried out in severe exposure environments (XC - XS - XF), characterized by aggression from sulphates, chlorides, and nitrates. The material can also be used for repairs in anchoring areas subject to high stresses. The application surfaces must be clean, free of dirt, crumbly and incoherent parts, dust, etc., and suitably saturated with water until reaching the condition of "saturated with dry surface". Adequate roughening of the surfaces by scarifying, sandblasting, etc. is always necessary to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). It is strongly recommended, for optimal performance of site operations, to use a vertical axis mixer with planetary movement or a double horizontal helicoid. The powder is mixed with drinking water to the extent of 11% - 12%, referring to the total weight of the mortar (about 2.75 liters per 25 kg bag) until a homogeneous mixture is obtained. Mixing time: about 4 minutes with a high efficiency mixer. The anchoring can be filled with a single screw pump, for mortars. Pumping must be carried out at a controlled speed to ensure a low working pressure. In case of restorations, the surface must be protected, after application, by polyethylene sheets or anti-evaporation treatments. Packaging: 25 kg bag Unit of Measure: €/kg

TECHNICAL SPRAYS TSP 110primer light grey 400ml TSP 120primer grey 400ml TSP 130primer dark grey 400ml TSP 140primer white 400ml

SANDING

SANDING

TECHNICAL DEFINITION Multi-purpose filler for interior use. • Filling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates: plaster, plasterboards, plaster blocks, concrete, cement rendering,concrete blocks, aerated concrete, brick, earthenware, TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard NFT 30 608 • pH : neutral • Setting starts after 50 minutes • Setting ends in 1 hr 10 min • Bending : 3 N/mm2 • Compression : 7 N/mm 12 kg buckets on wrapped pallet. STORAGE 9 months in original unopened packing protected from damp. THE TEMPERATURE DURING APPLICATION AND DRYING MUST BE SUPERIOR TO 5°C. DO NOT USE ON A DAMP SUBSTRATE. DO NOT USE ONCE THE PASTE HAS STARTED TO SET.

DÉFINITION TECHNIQUE Enduit de rebouchage fibré, pour un usage en intérieur. • Rebouche : trous, fissures, saignées. • Scelle et fixe. • Colle : polystyrène, rosaces, corniches. ROC-ENDUIT est particulièrement adapté aux gros travaux de rebouchage. COMPOSITION ET ASPECT Enduit en poudre à base de plâtre, carbonate de calcium, résine, fibre de cellulose et divers adjuvants. La pâte obtenue est de couleur blanc cassé. SUPPORTS ADMIS Tous types de supports en intérieur : Plâtre, plaques de plâtre, carreaux de platre, béton, enduit ciment, agglos, béton cellulaire, briques, terre cuite... DOCUMENTS À CONSULTER Enduit conforme à la norme NFT 30 608. DTU 59.1 : Travaux de peinture. REVÊTEMENTS Le recouvrement, après séchage complet de l’enduit, peut se faire par tous types de peintures, enduits à base de plâtre, enduits pâteux, colle papier peint. Les colles carrelage devront être adaptées aux supports plâtre. CARACTÉRISTIQUES TECHNIQUES • Granulométrie : jusqu’à 800 µm •...